EasyManua.ls Logo

Omron SYSMAC CV1000 - B Specifications

Omron SYSMAC CV1000
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
115
Appendix B
Specifications
Host Interface Specifications
Communications method Four-wire, half duplex
Synchronization method Start-stop, 1 or 2 stop bits (set in PC Setup)
Baud rate 1200/2400/4800/9600/19200 bps (set in PC Setup)
Transmitted code 7- or 8-bit ASCII (set in PC Setup)
Error detection Vertical parity, even/odd/none (set in PC Setup), FCS (frame check sequence)
Interface RS-232C/RS-422 (set on selector on CPU)
Transmission distance RS-232C: 15 m max.; RS-422: 500 m total max.
(See details under System Configuration.)
Cable Lengths
RS-232C cable 15 m max.
Total length of RS-422 cable 500 m max.
Length of each RS-422 branch 10 m max.
Optical Connections
Cable Units with “P” in suffix Units without “P” in suffix
APF 20 m Connection impossible
PCF 200 m 800 m

Table of Contents

Related product manuals