Omron V600 Series Operation Manual

4-2SectionMonitor Unit Operation List
58
4-2-2 Data Read and Write Operations
Operation
mode
Description Basic operation procedure Page
Read (READ) Data from any desired
address is read from
DC.
READ
DEC DEC
Decrement address, and read
Job spec
Address
setting
READ
63
Step write
(WRITE1)
One byte of data is
written to any desired
address in the DC.
SET
WRITE
1
Job spec
Address
setting
Data spec
65
Continuous
write (WRITE2)
The same data is
written to the desired
continuous series of
addresses in the DC.
End address
Data specification
ADRS
DATA SET
WRITE
2
Start address setting
ADRS
Job spec Num. Key Num. Key
Num. Key
66
4-2-3 Operation Test at System Startup
Operation mode Description Basic operation procedure Pages
Select test
parameter
Selects operation to test
from among read, auto
read, write, and auto write.
Job spec
Test 1
2
3
4
Read test
W rite test
Auto read test
Auto write test
67 to 71

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C