Omron V640 Series User Manual

14
SECTION 1
System Configuration
CIDRW System
User’s Manual
SECTION 1
Product Outline
System Configuration
V640-HAM11-ETN-V2
V640-HAM11-L-ETN-V2
If the IP address is set on the DIP switch, it will be in the form 192.168.1.@@@. The subnet mask is always 255.255.255.0
The IP address of the Amplifier Unit can be either set on this DIP switch or the desired IP address can be set in ROM. If pins 1 to
5 on the DIP switch are all turned OFF, the IP address that is set in ROM will be used.
CIDRW Head
V640-HS61
Amplifier Unit
V640-HAM11-ETN-V2
Ethernet hub
Recommended: W4S1-05B(OMRON)
Host device
LAN cable
LAN cable
Host device
CIDRW Head
V640-HS62
Amplifier Unit
V640-HAM11-L-ETN-V2
Ethernet hub
Recommended: W4S1-05B(OMRON)
LAN cable
LAN cable

Omron V640 Series Specifications

General

Brand	Omron
Model	V640 Series
Category	Amplifier
Language	English