RFID System
User's Manual
(Modbus TCP)
Section 1 Features
Section 1
Product Overview
17
Stable Operation
When the Reader/Writer communicates with an RF Tag, it diagnoses the communications leeway and
reports the result. You can check the communications leeway to appropriately install the Reader/Writer
and RF Tags to achieve stable operation of your OMRON RFID System.
You can use communications leeway diagnosis with Reader/Writers with firmware version 2.00 or higher.
For details, refer to Using Communication Diagnostic and the RF Analyzer in Section 6 Functions.
p.129
If you use the RFID System under installation conditions that provide a high communications leeway,
you can reduce communications troubles during system operation and achieve stable line operation.
Area of stable communications
Area of unstable communications
Area of stable communications
Area of unstable communications
Area of stable communications
Area of unstable communications
Operation Indicator lights green Operation Indicator lights yellow Operation Indicator lights red
To Next Page
Loading...
