Omron V680 Series - Page 24

22
Section 1 Application Flowchart
RFID System
User's Manual
(Modbus TCP)
Section 1
Product Overview
p.129
Using Communication Diagnostic to Check Communications Leeway
1. Connect the Ethernet cable, turn ON the power supply to the Reader/Writer, and then start a
Web browser on a computer.
2. Specify the IP address of the Reader/Writer in the address field of the Web browser.
Enter http://192.168.1.200/ if you are using the default IP address.
3. The Communications Setting View will be displayed.
http:// (IP address)
Trial Operation