Why is Omron ZW outputting measurement values even when the sensor head's fiber cable is not connected to the controller?
If measurement values are output even when the sensor head's fiber cable is not connected, it is likely because the controller side fiber connector is dirty. Clean the surface.
How to establish Ethernet communication on Omron ZW?
If Ethernet communication cannot be established: * The Ethernet cable is not connected correctly: Use a cross cable when connecting the controller directly with the personal computer. * The IP address and subnet mask are not set correctly: Set the IP address and subnet mask correctly. Note: The settings become effective after a reboot.
General| Brand | Omron |
|---|---|
| Model | ZW Series |
| Category | Accessories |
| Language | English |
To Next Page
