CONTROL
SYSTEM
Due to the wide variety of
uses
to
which
these
engines
are
adapted, operating ccntrols are not supplied
with
the
majority
of
these
engines. The
engines
in most
cases
are
used for prime power to
operate
other.manufacturers equip-
ment. Installation nearly always
differs.
Therefore the
manufacturer or fabricator generally provides a control, or
control
components for engine, incorporated in a control
for
the complete
unit.
Operating controls are furnished on
some
models when the
customer can use standard controls. They are mounted on
the
rear
cylinder air housing,
diagram.
Refer to
page
60 for
wiring
For
basic
engine controls and optional equipment controls
which
are mounted on the engine, instructions are included
in
the related groups in the manual.
MAINTENANCE
Periodically
check all connections and contacts in the
control
system to be
sure
they are
tight
and clean.
40