Digital Zooming
When digital zooming is on, there will be magnified and zoomed icons, providing 4x magnification view.
Image Info Overlays
The video pixel size is 640x320 by default. Currently settings disabled.
Data Encryption
Image encryption settings, ON: encrypt data via AES128; OFF: The data is not encrypted. After data is encrypted,
must use software that accompanies the device to view images. Export JPG images after encrypting data via
software.
Speed Measurement Settings
On main menu page, click icon to enter. Use buttons or touch screen to operate.
Capture Mode
. Continuous Mode: Pull the trigger to measure speed. Only save results if the speed is out of limit when
releasing trigger.
. Lock Mode: Pull the trigger to measure speed. When detecting ideal speed which is out of limit, lock onto
the vehicle and take snapshots.
. Auto Mode: Press trigger to start speed measurement. Press again to stop speed measurement. When
vehicles reach +/- 20m around best focus distance and the speed is out of limit, it will take
snapshots.
. Video Mode: Pull trigger to initiate video recording. Release trigger to stop video recording and save videos.
. Tracking Mode: It starts video recording when vehicles haven’t reached focus location. Then, it switches to
taking static images and saves.
. Distance Mode: This mode is only used to measure distance. Press the trigger to start ranging.
(Remark: shortcuts buttons are invalid)
Weather Mode
In bad weather, such as rainy and snowy days, need to open this mode. The inside of device will block
interference, improving reliability of testing. This function is not needed in general conditions.
Measurement Unit Setting
To Next Page
Loading...
