Onida GOOGLE TV - Page 15

Chapter 3 Source Connecon
151515151515
3.) Plug your TV's power cord into a power outlet, then turn on your TV.
4 .) Turn on the digital speaker system or sound bar, then set it to the correct source. See the documentaon th t came along
with the digital speaker system or sound bar.
Note: Depending on the audio device you are connecn , you may need to change the digital audio format for your TV. The
default seng is A o.
5.)lf you need to change the digital audio format, go to the Home menu, select Sengs, then select Disp y & Sounds, then
Select Audio Output, then select Digital Audio Format and change the seng o PCM or Dolby Digital.
6.1f you want to turn o ffyour TV speakers, go the Home menu, select Seengs, then select Dis y & Sounds. Select Audio
Output, then select TV Speakers and change the seng o OFF.
CAUTION:
• Your TV should only be operated from the power source indicated on the label.
• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of me.