Onkyo TX-SA806

113
Controlling Other Components—Continued
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TAPE] button is preprogrammed with the remote
control code for controlling an Onkyo cassette recorder
when used with an u connection.
For details on entering a remote control code for a differ-
ent component, see page 105.
On twin cassette decks, only Deck B can be controlled.
a ON/STANDBY button
Turns the cassette recorder on or off.
b Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
c Rewind and Fast Forward [5]/[4]
buttons
The Rewind [5] button starts rewind. The Fast
Forward [4] button starts fast forward.
d Reverse Play [t] button
Starts reverse playback.
e Play [1] button
Starts playback.
f MUTING button (58)
Mutes or unmutes the AV receiver/AV amplifier.
g VOL [q]/[w] button (56)
Adjusts the volume of the AV receiver/AV ampli-
fier.
h Stop [2] button
Stops playback.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode.
The [TUNER] button is preprogrammed with the remote
control code for controlling an Onkyo tuner when used
with an u connection.
Before controlling the tuner, turn the AV amplifier on.
a [TUNER] button
Used to select either AM or FM.
b CH +/– button
Used to select radio presets for a connected tuner.
Controlling a Cassette Recorder
1
6
7
8
2
3
4
5
Press the appropriate
REMOTE MODE button first
* With some components, certain buttons may not work as
expected, and some may not work at all.
Controlling a Tuner (TX-SA806 only)
1
2
TX-SR806_En.book Page 113 Monday, August 4, 2008 10:25 AM