Onkyo TX-SA806

48
First Time Setup—Continued
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
TV Format Setup
(not North American models)
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select “6. Miscella-
neous”, and then press [ENTER].
The “Miscellaneous” menu appears.
3
Use the Up and Down [q]/[w] but-
tons to select “2. OSD Setup”,
and then press [ENTER].
The “OSD Setup” menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
6–2. OSD Setup
Immediate Display
Monitor Type
Display Position
TV Format
Language
On
16 : 9
Bottom
Auto
English
4
Use the Up and Down [q]/[w] but-
tons to select “TV Format”, and
then use the Left and Right [e]/
[r] buttons to select:
Auto: Select this to automatically
detect the TV system from the
video input signals.
NTSC: Select if the TV system in
your area is NTSC.
PAL: Select if the TV system in
your area is PAL.
5
When you’ve finished, press the
[SETUP] button.
The setup menu closes.
TX-SR806_En.book Page 48 Monday, August 4, 2008 10:25 AM