To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SA806 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| HDMI Version | 1.3a |
| USB Port | No |
| Network Capability | No |
| Bluetooth | No |
| Wi-Fi | No |
| Power Output (per channel) | 130W (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS-HD High Resolution Audio |
| THX Certified | Yes (THX Select2) |
| THD | 0.08% |
| Frequency Response | 5Hz-100kHz |
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 106dB |
| Video Inputs | Component (3) |
| Audio Inputs | Digital Coaxial x2 |
| HDMI Upscaling | Yes (up to 1080p) |
Setting the video output for HDMI or component connections.
Assigning HDMI inputs to specific input selectors for proper recognition.
Configuring speaker settings like type, impedance, and crossover frequencies.
Automated speaker calibration for optimized room acoustics.
How to choose the audio/video source for listening or viewing.
How to choose appropriate listening modes for different source formats.
Navigating the receiver's setup menus via the TV display.
Configuring speaker settings like type, distance, level, and crossover.
Adjusting the distance of each speaker from the listening position.
Adjusting individual speaker volume levels for balanced sound.
Methods for connecting speakers to the unit or an external amplifier for Zone 2.
Enabling or disabling powered Zone 2 speaker output.
