Onkyo TX-SV343

Selecting a Surround mode
1 2 DELAY TIME 4
HOE
1.
Use
the
SURROUND
MODE
button
to
select
the
surround
mode.
Select
DOLBY
PRO
LOGIC
or
HALL.
(Refer
to
page
19
for
details
of
the
Sur-
round
mades.)
2. If DOLBY PRO LOGIC was selected
in step 1, use the CENTER MODE
button to select the center mode.
Oo
«2
—
3.
If
DOLBY
PRO
LOGIC
was
selected
:
in
step
1,
play
a
Dolby
Surround-
encoded
source.
4.
Adjust
the
MASTER
VOLUME
con-
trol
knob.
@ Treble, Bass and Balance controls are
effective only for the Front left and
: right speakers. The best effect from
/
Dolby
Pro
Logic
Surround
can
be
|
e
obtained
when
equal
settings
are
used
[
for
the
sound
from
the
L/R
front
speak-
7 ers and the sound from the center
~
<
:
speaker
for
the
middle
and_
treble
MASTER VOLUME
ranges.
You can change the delay time for the
sound from the rear (surround) speakers.
& Pressing the DELAY TIME button changes
DELAY
TIME
:
:
the
delay
time
every
5
msec
during
a
period
@Q @ of 15 to 30 msec in Dolby Pro Logic and
& every 5 msec during a period of 5 to 30 msec
in Hall. Delby Surround delay time is speci-
fied at 20 msec. It is recommended that ini-
tial Dolby Surround delay time be set at 20
msec, and adjustment to either 15 or 30 pos-
sible via the control. By adjusting the delay
time. and carefully adjusting Master Volume
# Level, Center Volume Level and Rear Vol-
SPORES A | ume Level, the apparent acoustic size of
. f your listening room can be enlarged or
deduced. Adjustable delay time allows you
to tailor the acoustic size of your listening
environment to match the sonic characteris-
tic spaces, such as concert hails, cathedrals,
etc. Use a shorter delay to simulate the size
of a small club or cabaret. Respective delay
time can be memorized for each surround
mode.
@ When you press the DELAY TIME but-
ton, DELAY and the delay time will be
shown for 3 seconds on the display.
SURROUND MODE