Onkyo TX-SV343

22
Using TAPE (MONITOR) Button
Connect the graphic equalizer to the TAPE
VIDEQ 1VDP VIDEO-2°VCA TWALIX TAPEIMONITOR] FM AM PHONO CB
: jacks on the rear panel.
} jacks on the graphic equalizer.
While pressing the button for the source
that you wish to equalize and listen to,
press the TAPE (MONITOR) button.
§ The| TAPE MON. |indicator lights up.
—SPEAKERSASSS=~“—~sS | Follow the graphic equalizer operating
/TAPEMON.
VIDEG
[2]
;
;
—_
—
:
instructions.
} i -| pth. f To record an equalized signal, use the tape
_ : deck connected to the equalizer for record-
: ing.
4 5 second after 4 To turn the | TAPE MON.| indicator off,
# press the TAPE (MONITOR) button while
SPEAKERS ASS~S~S ® pressing the button for the source.
TAPEMON
VIDEO
[2]
4
i TI | CAUTION:
L ti $e Do not use a Surround mode together
with the equalizer. This will result in
distortion and possible damage to Sur-
round decoder circuitry.
If a 3-head tape deck is connected to this
unit, the recording can be monitored.
‘a
<=
———
=
=
lf
the
[
TAPE
MON.
|
MON.
|
indicator
is
not
lit,
the
LL
a
ae
—
sound
from
the
source
(the
sound
that
has
: — not yet been recorded) is heard.
If the indicator is lit, the
— sound that has just been recorded can be
Lit Not lit f heard.
f To turn the [TAPE MON. ] indicator on
SPEAKERS A SPEAKERS A | or off, press the TAPE (MONITOR) but-
TAPEMON VIDEO ie! wipro fe ton while simultaneously pressing the
input selector button for the desired
source.