11
Connecting antennas
Connecting the T-shaped FM antenna:
The T-shaped FM antenna is for indoor use only. Extend the
antenna and move it in various directions until the clearest
signal is received. Fix it with push pins or similar imple-
ments in the position that will cause the least amount of dis-
tortion.
If the reception is not very clear with the attached T-shaped
FM antenna, the use of an outdoor antenna is recommended.
Connecting the AM loop antenna:
The AM loop antenna is for indoor use only. Set it in the
direction and position where you receive the clearest sound.
Put it as far away as possible from the unit, TVs, speaker
cables, and power cords.
When reception is not satisfactory with the attached AM
loop antenna alone, connection of an outdoor antenna is rec-
ommended.
Please make sure that you follow the considerations below
regarding the location.
Keep the antenna away from noise sources (neon signs, busy
roads, etc.).
It is dangerous to put the antenna close to power lines. Keep
it well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary. Follow item 19 of the “Important
Safeguards” on page 2 when you install the outdoor
antenna.
The outdoor antenna will be more effective if it is stretched
horizontally above a window or outside.
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary. Follow item 19 of the “Important
Safeguards” on page 2 when you install the outdoor
antenna.
Connecting the included antennas
Connecting an FM outdoor antenna
Connecting an AM outdoor antenna
ANTENNA
FM
75Ω
AM
ANTENNA
FM
75Ω
AM
ANTENNA
FM
75Ω
AM
ANTENNA
FM
75Ω
AM
Outdoor
antenna