Onkyo TX-SV353

19
Recording a source
Please read the instruction manuals con-
cerning the operation of each unit.
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the
source from which you want to
record.
● When VIDEO-1/VDP or VIDEO-2/
VCR is selected, it will (naturally) only
record the audio.
● When FM or AM is selected, set the
tuner to the station from which you
want to record from.
3. Put the tape deck in the recording
mode. Begin playing the source.
Set the proper recording level using the
controls on the tape deck used for record-
ing. Also, if any controls (bass, treble etc.)
on this unit are changed during recording
operation, the tone effects will not change.
If a monitor is being used, refer to page 20.
Recording an audio source
Tape deck
(TAPE (MONITOR))
Turntable
VCR, VDP
CD player
1·3 3
BALANCETREBLEBASS
SYSTEM
ON
OFF
SPEAKERS A
SPEAKERS B
PHONES
DOLBY SURROUND
PRO • LOGIC
AMFMTAPE(MONITOR)TV/AUX PHONO
/1VIDEO VDP
/2
VIDEO VCR
MAXMIN
AUDIO VIDEO CONTROL RECEIVER TX-SV353
LR
C D
MASTER VOLUME
STAND-BY
123
456
789
GROUP 0/10 SCAN
MEMORY FM MUTE / MODE
CLEAR
CENTER
MODE
SURROUND
MODE
DELAY TIME
TUNING DIRECT TUNINGDOWN UP
2
2
VIDEO-1/VDP
VIDEO-2/VCR
AMFMTAPE(MONITOR)TV/AUX PHONO C D
1. Insert the LD or tape that you want
to record into the VDP or VCR con-
nected to VIDEO-1.
2. Insert a blank video tape in the VCR
connected to VIDEO-2.
3. Press the VIDEO-1/VDP button.
4. Begin playback of the video con-
nected to VIDEO-1 and start record-
ing on VIDEO-2.
Adding new sound to a video tape during
video editing
During video tape editing, you can add the
desired sound to the recording VCR from
various audio program sources.
Perform steps 1. through 3. above, then
complete the steps below.
4. Select the audio program source (TV/
AUX, TAPE, FM, AM, PHONO,
CD).
5. Begin playback of the video con-
nected to the VIDEO-1 and also start
the sound source, then start record-
ing on the VIDEO-2/VCR.
Refer to the video disc player, video cam-
corder, or VCR instruction manuals for
additional information.
Video disc player (or video
camcorder) to VCR recording
VCR
(VIDEO-2)
VDP
(VIDEO-1)
2·4 1·4
BALANCETREBLEBASS
SYSTEM
ON
OFF
SPEAKERS A
SPEAKERS B
PHONES
DOLBY SURROUND
PRO • LOGIC
AMFMTAPE(MONITOR)TV/AUX PHONO
/1VIDEO VDP
/2
VIDEO VCR
MAXMIN
AUDIO VIDEO CONTROL RECEIVER TX-SV353
LR
C D
MASTER VOLUME
STAND-BY
123
456
789
GROUP 0/10 SCAN
MEMORY FM MUTE / MODE
CLEAR
CENTER
MODE
SURROUND
MODE
DELAY TIME
TUNING DIRECT TUNINGDOWN UP
3