OpenScape CP110 - Page 60

60 Making calls in the team/executive/secretary configuration
Deactivating call forwarding
 Open the menu page 18.
Select and confirm the option shown.
Press the required line key.
or
j
Enter the required trunk number.
or
If available, press the key shown.
Understanding notification messages on the "CFW MULAP"
The notification for the “Fwd Line” key is off – call forwarding is not
active for this trunk.
or
The notification for the “Fwd Line” key is on – call forwarding is active
for this trunk.
or
The notification for the “Fwd Line” key flashes slowly or is shown in-
verse - the trunk is the destination of call forwarding.
#501=Forward Line: Off
Line

Fwd Line

If you have activated call forwarding for a trunk, a special dial
tone sounds when the line is seized.
Fwd Line

Fwd Line

Fwd Line
