OpenScape CP110 - Appointment Reminder Function; Saving a Timed Reminder; Using Timed Reminders

74 Other settings and functions
Appointment reminder function
You can configure your phone to call you to remind you about appo-
intments
page 74. You have to save the required call times to do
this. You can enter a single appointment that will take place in the next
twenty-four hours or you can enter a daily recurring appointment.
Saving a timed reminder
 Open the menu page 18.
Confirm the option shown.
j Enter a 4-digit time such as 0905 for 9.05 (=9.05 a.m.) or 1430 for
14.30 (=2.30 p.m.).
If nec.
2
or
7
If the selected language is "US English" (settings page 20) you can
enter the code 2 for "am" or 7 for "pm" (default = "am").
Confirm the option shown.
or
Select and confirm the option shown.
Confirm the option shown.
Deleting and checking a saved appointment
 Open the menu page 18.
Confirm the option shown.
Confirm the option shown.
or
Select and confirm the option shown.
Using timed reminders
Prerequisite: You have saved a reminder page 74. The saved
time arrives.
The phone rings. The appointment time is displayed.
 Press the key twice.
or
jP Lift the handset and replace it again.
*46=Alarm call on?
One time only?
Daily?
Save?
#46=Alarm call off?
Delete?
End?
Reminder at 1200
If you do not answer the timed reminder, it is repeated five times
and then deleted.