70 Privacy/security
User password
Your User password protects your individual configurations.
The administrator may have configured the following settings:
• The password is deactivated: You do not have the option of configu-
ring user settings. The message "Password is disabled" is displayed.
• The password is temporarily locked: You do not have the option of
configuring user settings at this time. The message "Password is
suspended" is displayed.
• After initially logging on to a user area, you may have to replace the
default password with a new password.
• A password can have a predefined period of validity: You will have
to create a new password when the period ends. The message
"Change (x days left)" will alert you to this at the appropriate time.
The message "Password has expired" appears when the validity pe-
riod is over. Confirm "Change password" and change the password
as described in this section.
• If you repeatedly enter the wrong password (2 to 5 times), additio-
nal attempts are blocked. You can make another attempt after a pre-
defined time.
• It is possible that you will not be able to re-use a previously used
password for a period of time, which means you have to create an-
other "new password".
Your administrator can tell you about the rules for what and how many
characters can or must be used in the password.
Changing the password
z The User password can be modified via the WEB-Interface
page 93.
The preset password "000000" corresponds to a blank password.
In other words, the phone cannot be locked and the user menu
is not password protected.
To Next Page
Loading...
