OpenScape CP110 - Group Call;Hunt Group; Activating;Deactivating a Group Call

62 Group call/hunt group
Group call/hunt group
If configured (consult your Administrator), your telephone is part of a
team. The team consists of internal phones that are able to use certain
functions.
Activating/deactivating a group call
If configured (consult your Administrator), you belong to one or more
groups of stations, which can be reached via hunt group or group call
phone numbers.
Incoming calls are signaled one after the other (= hunt group) or si-
multaneously (= group call) on all phones in the group, until a group
member answers the call.
Each station in the group can still be reached via its own phone num-
ber.
You can activate and deactivate the audible signal for a hunt group,
group call or individual trunks in a group.
You are part of a hunt group or call group
€ Open the idle menu page 14.
Select and confirm the option shown.
or
Select and confirm the option shown.
Press the key shown.
or
Press the key shown.
Special features must be taken into consideration if your tele-
phone operates with system networking via LAN
page 87!
Leave hunt group?
Join hunt group?
Hunt group IN/OUT

Hunt group IN/OUT
