80 Other settings and functions
Controlling connected computers/
programs/telephone data service
If this function has been configured (contact your Administrator), you
can control connected computers or programs running on them, such
as hotel services or information systems, from your telephone.
Prerequisite: You have set up a connection.
Open the menu page 18.
Confirm the option shown. For entering data, you are guided by the
connected computer. However, depending on the configuration (con-
sult your Administrator), you have to enter your data in one of the fol-
lowing two ways:
Input in en-bloc mode:
0 ... 9 Enter data.
#
Complete entry.
or
Confirm the option shown.
or Input in online mode:
The connected computer processes your entries directly.
#
Enter the code.
0 ... 9
Enter data.
Paging persons (not for U.S.)
If radio paging equipment (PSE) is connected to your system (consult
your Administrator), you can locate people via their pocket receivers.
Pocket receivers signal a call request to the person you want to page.
This person can then answer the page at the nearest phone.
Paging persons
To ensure that you can be found, you must have enabled a ringing
group
page 64, call forwarding page 43 or call forwarding-no
answer (service technician) to the internal phone number of your PSE.
A call request is signaled automatically.
Responding to a page request
Ì Lift the handset.
*59 Enter the code.
j Enter own phone number.
To Next Page
Loading...
