OpenScape CP110 - Forwarding Calls on Trunks

Making calls in the team/executive/secretary configuration 59
Forwarding calls on trunks
You can immediately forward internal and/or external calls to your li-
nes to different internal or external telephones (destinations).
If you activate call forwarding for a line, this will apply to all line keys
of your group for this line.
 Open the menu page 18.
Select and confirm the option shown.
or
If available, press the key shown. (You have not saved the “Fwd Line”
key in full, i.e. no forwarding type and destination
page 26).
Press the required line key.
or
j
Enter the required trunk number.
Confirm the trunk number.
Select and confirm the option shown.
or
Select and confirm the option shown.
or
Select and confirm the option shown.
j Enter the destination phone number.
Confirm the option shown.
or
If available, press the key shown. (You have saved the call forwarding
type and destination on the "Fwd Line” key,
page 26.)
*501=Forward Line: On
Fwd Line

Line

12345: ...
1=all calls
2=external calls only
3=internal calls only
Save?
Fwd Line
