Web interface (WBM) 93
Web interface (WBM)
General
You can configure a number of settings for your phone via the web interface. Com-
munication is via a secure HTTPS connection. Access to the web interface must be ac-
tivated by your administrator.
Launching the web interface
To launch the interface, open a web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
Administrator Settings
This area lets you configure settings for administering your phone and the network
environment. Access to the Administrator Settings is protected by the admin pass-
word. For further information, consult your administrator or refer to the administrati-
on manual.
Ask your Administrator about the IP address, the web interface address and how
to connect the telephone to the network.
You might receive a certificate notification from the browser. Follow the instruc-
tions to download the certificate.
You will be prompted to configure a user password
page 70 the first time you
call up the web interface. You must log in with this password the next time you
want to open the User settings.
To Next Page
Loading...
