Maintenance
Version 1.2.4 - 2022-10-2638 Translation of original instruction
S275N | S275NV
EN
S275N_S275NV_GB_5.fm
Interval Where? What? How?
As required and
after changing
the saw belt
Saw arch
Adjusting the
saw belt tension
Adjusting the
position of the saw
belt on the saw
belt rollers
The saw belt is being tensed with the handwheel.
Turn the handwheel clockwise to increase the
tension in the saw belt.
The correct saw band tension is reached when the
saw band has been tensioned in the green area of
the pressure gauge.
Img.5-1: Saw belt tension
To Next Page
Loading...
