Optimum T4210 - Page 75

Appendices © Hypercom EMEA Ltd. 2011 75
Appendix C: Terminal functions
Set/Change
Local Password
MAIN MENU > SETUP > PASSWD
By default, the local password is set to „0000‟.
Use this option to set your own password.
Keypad Lock
FUNCTION > 4 > Enter
Allows the user to lock the keypad to stop
accidental or unauthorised use. Typing in the
Merchant password (factory default is 0000)
unlocks the keypad.
Reprint MAIN MENU > NEXT > REPRINT > LAST >
LIMITED VIEW
Allows the user to reprint a receipt of the last
transaction in the current Batch.
(See page 61 for an alternative procedure)
Training Mode MAIN MENU > TERM > TRAIN
Allows the user to conduct training sessions by
switching to Training Mode.
(See page 32 for more information)
Change
Date and Time
MAIN MENU > SETUP > DAT/TIM
Allows the user to change the current date and
time.
PLEASE NOTE: Enter the date in format
(MMDDYY).
Printer Test MAIN MENU > NEXT > TESTS > PRINTER >
RECEIPT
Allows the user to test the printer.
Paper Feed Press the * Button (only if on the idle screen)
OR
MAIN MENU > SETUP > PRINTER > PAPER FEED
Feeds the paper by 10mm