• Series 1 Integrated and Pole Displays:
– Series 1 displays are supported by the Workstation 5, 5A, PCWS 2015, and
KW270.
– 240x64 STN Graphics capable LCDs with 2x20 emulation mode text
capability.
• Series 1 Integrated or 6 inch pole mounted Protégé Customer Display System:
– The Protégé is an intelligent customer facing display based on a 7 inch
800x400 Color LCD.
– The Protégé is compatible with many current workstations.
• Series 2 Integrated and Pole Displays:
– Matches the colors and styling of the MICROS Workstation 6, MICROS
Tablets, and MICROS Base Stations. The following displays are available.
* 240x64 STN Graphics capable LCDs with 2x20 emulation mode text
capability.
* 2x20 Text LCD.
• Series 1 and 2 Integrated Customer Displays:
– Both are supplied assembled with the appropriate mounting bracket.
– The Series 1 Pole displays are available in sizes of 6 and 18 inches.
– The Series 2 pole display is available in a size of 18 inches.
– The Series 1 and Series 2 pole display bases use the same hole-pattern.
Mounting hardware is not supplied.
– The APG 4000 Series Cash Drawers include the customer display base hole-
pattern.
Cash Drawer
A Workstation can have one or two Cash Drawers attached. Standard and Low Profile
Cash Drawers are available. Programming determines which keys and employees
have access to each drawer. Cash Drawers can also be locked or opened in
emergencies with a cash drawer key.
Barcode Reader
A barcode reader is used to scan an item’s barcode or UPC (Universal Product Code)
label so an employee can record and post sales.
Coin Changer
A coin changer is a device that issues the coin portion of a customer’s change when
the customer pays a check or transaction. The coin changer increases the employee’s
speed (no coins to count) and reduces mistakes caused by giving incorrect change.
The Telequip T-Flex Coin Dispenser is available with an RS232 Interface and
matching charcoal casework.
Chapter 18
Cash Drawer
18-2
To Next Page
Loading...
Need help?
General
