1
Introduction to the Oracle MICROS
Hardware
This guide introduces the Oracle MICROS Point-of-Sale (POS) hardware plus the
printers and network connections required to tie it all together.
From a site preparation standpoint, a typical system may be composed of the following
components:
• MICROS Workstations
• Peripherals such as Scales, Coin Changers, and Bar Code Readers
• Printing Devices using RS232, IDN, and Ethernet interfaces
• Kitchen Display Systems (KDS)
• e7 Kitchen Video Monitor (KVM) Controller
• Order Confirmation System (OCS)
• e7 Back Office Controller or Digital Menu Board Controller
The AC Power Requirements and Cable Requirements sections provide more
information on the AC power, cable, and network requirements for the MICROS
hardware.
1-1
To Next Page
Loading...
