Oracle Sun Fire X2270 M2

Run the install script by typing the following command:
# sh install.sh
The system device drivers are now installed. The script prompts you to reboot the system for
changes to take eect.
Reboot the server.
▼
How to Install the System Device Drivers Using a
Network Share or USB Device
Alternately, if your server does not contain a service processor, you can install device drivers
from a shared network location or from a locally attached USB device. To install the device
drivers:
If you have not already downloaded the le, download the linux.zip le from the Sun
download web site.
Unzip the contents of the linux.zip le to a USB ash device or shared network location that
will be accessible during the installation.
Change to the mounted USB device or shared network location by typing the following
command:
# cd <mount_point>
Run the install script by typing the following command:
# sh install.sh
The system device drivers are now installed. The script prompts you to reboot the system for
changes to take eect.
Reboot the server.
3
4
1
2
3
4
5
Installing System Device Drivers to Support Additional Hardware
Sun Fire X2270 M2 Server Installation Guide for Linux Operating Systems • September 2011, -1232