EasyManuals Logo
Home>Oracle>Server>Sun Fire X2270 M2

Oracle Sun Fire X2270 M2 Installation Guide

Oracle Sun Fire X2270 M2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
c. Register the OS, then download available updates to the operating system.
Alternatively, see
“How to Update the SLES Operating System” on page 30 to manually
update your SLES OS.
Review and, if necessary, perform the post installation tasks described later in this chapter.
Refer to
“Post SLES Installation Tasks” on page 29.
Installing SLES10 or SLES 11 Using a PXE Network
Environment
This section describes how to boot SLES10 or SLES11 from a PXE network environment. It
assumes that you are booting the installation media from one of the following sources:
SLES10-SP3 or SLES11 CD or DVD set (internal or external CD/DVD)
SLES10-SP3 or SLES11 ISO DVD image or AutoYaST image (network repository)
AutoYaST enables you to install the SLES operating system on multiple systems. For
information about how to prepare an automated installation using AutoYaST, refer to the
Novell SUSE documentation collection at:
http://www.novell.com/documentation/suse
How to Install SLES10 or SLES11 Using Network PXE
Boot
The following requirements must be met prior to performing the SLES installation from a PXE
network boot environment:
If you are using AutoYaST to perform the installation, you must:
Create the AutoYast prole.
Follow the AutoYaST installation instructions in the SUSE Linux Enterprise 10 or SUSE
Linux Enterprise 11 documentation.
To use PXE to boot the installation media over the network, you must:
Congure the network (NFS, FTP, HTTP) server to export the installation tree.
Congure the les on the TFTP server necessary for PXE booting.
Congure the Sun Fire X2270 M2 MAC network port address to boot from the PXE
conguration.
Congure Dynamic Host Conguration Protocol (DHCP).
Follow the setup instructions for booting SUSE media over the network in the SUSE Linux
Enterprise 10 or SUSE Linux Enterprise 11 documentation.
14
BeforeYou Begin
Installing SLES10 or SLES 11 Using a PXE Network Environment
27

Table of Contents

Other manuals for Oracle Sun Fire X2270 M2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle Sun Fire X2270 M2 and is the answer not in the manual?

Oracle Sun Fire X2270 M2 Specifications

General IconGeneral
BrandOracle
ModelSun Fire X2270 M2
CategoryServer
LanguageEnglish

Related product manuals