SAMPLE ANALYISIS- WET FLOWER
9. Place a vial cap on the scale and press “tare”. Ensure scale now reads zero with
cap resting on it. Press forward arrow on the LightLab screen.
10. Add the amount of sample indicated by the device (either 100mg (+/- 10mg) or
500mg (+/-50mg) depending on the options selected) to the scale. Make sure all
sample is within inner circle of cap. Press forward arrow on the screen.
The sample may alternatively be weighed in a small weigh boat or the sample
vial. If a weigh boat is used, we recommend placing the whole weigh boat into
the sample vial so that no trichomes are lost during the transfer to the vial.
To Next Page
Loading...