BASIC OPERATION
12
Making an external call
With cordless handset
Normal dialling
1. Press key.
2. Enter a telephone number. If you enter more than 14 digits, you only see the last
14 digits on the display.
3. Press key to end the call.
Pre-dialling
1. Enter a telephone number.
2. When necessary, press X to erase the digit individually.
3. Press key to dial.
4. Press key to end the call.
With base unit
1. Press key.
2. Enter a telephone number.
3. Press key again or hang up the handset to end the call.
Mute feature
Place a call on hold so that caller will NOT be able to hear you but you can still hear
the caller.
During talking mode,
1. Press X key on the handset to mute the call, is shown on the display.
2. Press X key again to resume the call.
To Next Page
Loading...
