Oricom M5200 Series User Manual

ANSWERING MACHINE OPERATION
28
Answering machine On / Off
During standby mode,
1. Press and hold key to switch the answering machine off.
“
Answering off” will be heard followed by two short beeps.
Note: During Off mode, the answering machine is set to Announcement Two
mode automatically. It will answer the call after 12 rings, and then switch to
remote control mode. This feature can not be turned off.
During Off mode,
1. Press and hold key to switch the answering machine on.
“
Answering on, Announcement One” will be heard followed by a short beep.
Answering Machine Operation
Day/Time setting
Default day and time – Sunday, 12:30
1. Press and hold key for 2 seconds. The voice prompt “Set day” will be heard.
2. Press
ANS
or
MEMO
key to select day. Voice prompt at each selection will be
heard.
3. Press key to confirm and go to next setting. The voice prompt “Set hour” will
be heard.
4. Press
ANS
or
MEMO
key to select hours. Voice prompt at each selection will be
heard.
5. Press key to confirm and go to next setting. The voice prompt “Set minute”
will be heard.
6. Press
ANS
or
MEMO
key to select minutes. Voice prompt at each selection will
be heard.
7. Press key to confirm setting and go back to standby or off mode.

Oricom M5200 Series Specifications

General

Brand	Oricom
Model	M5200 Series
Category	Cordless Telephone
Language	English