Oricom M5200 Series User Manual

ADVANCED ANSWERING SYSTEM
36
Remote operation keys
Keys on remote phone keypad Operation
1
Replay the current message
1(1)
Skip back to the previous message
2
Play new messages /Pause during playing messages
3
Skip forward to the next message
4
Playback OGM
5
Record a new OGM
6
Stop playback or recording
7
Delete the current message
8
Switch the machine off
9
Switch the machine on / Switch between OGM1 or OGM2
0
Delete all old messages
*
Skip announcement during playback
#
Recording MEMO
Call screening
Call screening function allows you to hear the caller before you pick up the call whilst the
M5200 is recording incoming messages.
You can screen incoming calls by waiting for the caller to begin leaving their message,
then pick up the handset, and press
key to talk to the caller. The answering machine
automatically stops recording when you activate the handset or pick up an extension
phone. This function cannot be turned off. If you do not want to hear the caller you can
turn down the base speaker volume (see page 15). To listen to your messages you will
need to turn up the volume again.
Cordless handset detection
The answering machine can detect the cordless handset while recording messages. It
automatically stops recording when you pick up the call using the cordless handset.
Note: The message recorded before you pick up the call will be deleted.

Oricom M5200 Series Specifications

General

Brand	Oricom
Model	M5200 Series
Category	Cordless Telephone
Language	English