Oricom M5200 Series User Manual

CORDLESS HANDSET OPERATION
24
Call transfer between cordless handsets
When there is an incoming external call,
1. Press INT key. The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to transfer.
3. Press key to exit Intercom mode and return to standby mode.
Transfer a speakerphone call from the base unit to the cordless handset
If there is an incoming external call,
1. Press key on the base unit.
2. Press on the cordless handset to pick up the call.
3. Press key again to cancel the call transfer.
Conference calls
This function allows 3 parties (yourself + external call + intercom call ) to be
connected at the same time.
When there is an incoming external call,
1. Press INT key. The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to invite to the conference.
3. Press key to pick up the call.
4. Press and hold INT key to go into the 3-way conference mode.
5. Press INT key to go back to Intercom mode.
6. Press key to exit Intercom mode and return to standby mode.

Oricom M5200 Series Specifications

General

Brand	Oricom
Model	M5200 Series
Category	Cordless Telephone
Language	English