Oricom M5200 Series User Manual

CORDLESS HANDSET OPERATION
26
REMOVE HS
PIN ?
REMOVE HS ?
Language setting
To select the display language,
1. Press key during standby mode.
2. Press or key to select
“LANGUAGE” from the display.
3. Press key to enter the mode.
4. Press or key to select Language options on the display.
5. Press key to confirm and return to standby mode.
LANGUAGE
Remove handsets
During standby mode,
1. Press key.
2. Press or key to select “REMOVE
HS” from the display.
3. Press key to confirm. The display on the
right is shown.
4. Enter the default value 0000.
5. Press key to confirm and the display on
the right is shown.
6. Press the numeric keys (1-4) to enter the
handset number.
7. Press key to confirm and return to standby mode.
8. Press key to confirm and return to standby mode.
9. LCD screen will display HS 1,2,3 or 4 and antenna icon will not flash.
Note: If the base is full and cannot add any more handsets, you will hear a tone.
See the next section to remove a handset.

Oricom M5200 Series Specifications

General

Brand	Oricom
Model	M5200 Series
Category	Cordless Telephone
Language	English