Orion ODC-10000 User Manual

- 26 -
ORION PDP
- 27 -
Innitely Expandable

ComPortconnectsordisconnectsthecommunicationbetweenPCandMLCD.y
ConnectMLCDtoPCComPortviaRS-232Ccable.y
GotoMSCSMenu→CommunicationandsetComPort.Click'Connect'usingmouseory
press'Ctrl+C'usingkeyboard.
Inordertodisconnectcommunication,click'Disconnect'usingmouseorpress'Ctrl+D'usingy
keyboard.
WhenyouuseUSB-to-RS-232Cconverters,youneedtosetComPortagain,becauseMSCS
usesoneofComPortno.1to30.

※Available Com Port on the PC is automatically recognized and displayed.
ComPortConfigurationy
Baud Rate 115200bps(Fixed)
Data Bit 8Bits
Parity None
Stop Bit 1Bit
Flow Control None

ThisfunctionisusedtocontroltheMLCDviaLANPORT.y
*ConnectMLCDtoPCComPortviaRS-232Ccable.
*ConnectMLCDtoPCLANPortviaLANcable.
Network IP setting for MLCD 1.
1)ExecutethePIC(forOLM-4610,OPM-4260)cfg.exe
2)SelectComPortandselect"OPEN".
3)SelectIDofMLCDwhichyouwanttocontrol.
4)TurnoffMLCD.
5)TypeinIPAddress.
MLCD

Orion ODC-10000 Specifications

General

Brand	Orion
Model	ODC-10000
Category	Monitor
Language	English