Orion OPM-4260 - Optional Mounting Unit Installation; MAIN FRAME Stand and Wall Mounting

- 16 - - 17 -
Install on a MAIN FRAME Stand
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.
MAIN FRAME Stand Unit (Option)
• The set can be installed as shown below.
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
MAIN FRAME Wall Mounting Unit (Option)
• The set can be installed on the wall as shown below.
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)
Mount on the MAIN FRAME wall
Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.
• Please do not install our product at following locations to protect the product
and prevent possible malfunction.
- Places of vibration or shock: PDP set may fall and damaged
- Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated.
- Around high voltage power lines: Noise from the power line may affect screen images
- Around heating apparatus: PDP set may be overheated and damaged.
• Please check the stability of wall.
If the wall is not strong enough, reinforce the wall before installation.
• Please connect all the cables to proper ports in a set before installation.
Hanger
Hanger Bolt
PDP
MAIN
FRAME
Guide Pin
Guide Pin
Hanger
Hanger Bolt
PDP
MAIN
FRAME
WALL
BRACKET
20cm
20cm
20cm
20cm
20cm
20cm20cm
OPM-4260 | OPM-4260R
Innitely Expandable