EasyManua.ls Logo

Orion OPM-4260 - Cable Connection Guide; Single MPDP Connection

Orion OPM-4260
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
It is highly recommended to use
RS-232C cable provided by ORION.
If you want to use the other RS-232C
cable, it must be shielded.
- 20 - - 21 -
ID SELECT VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
FANSTB PWR ON
4. How to Connect Cables
Do not connect/disconnect cables while MPDP or other external equipments are turned on.
First turn off the power all the attached equipment and make connections.
Make sure the power cord is inserted properly into the power inlet to prevent unexpected
pullout of the cord.
4.1. Connection of Single MPDP
MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a MPDP is
connected with supplied RS-232C cable.
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control
System).
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to control
MPDP with a PC.
If you do not have Com Port, you need to use an USB converter for RS-232C. Depending on
manufacturers or models, converters may cause malfunction.
PC
PC (MSCS) to control MPDP
RS-232C (Maximum 15m)
DVI connection
(Maximum 5m)
PC Connection
(Maximum 5m)
If you need longer
connection, please use DVI
boosters or DVI fiber-optic
cable.
[MPDP ID 1]
ID switch must be set as ID 1
for one set use.
DOWN
UP
PDP
CO., LTD.
Made in Korea
• Model Name : OPM-4260
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
MPDP
FCC Verified : Class "A"
This device complies with the Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer
servicing to qualified service personal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
ID SELECT
FANSTB PWR ON
AUDIO/VIDEO
APPARATUS
E329824
42SS
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
VCR
Video connection
(Maximum 5m)
OPM-4260 | OPM-4260R
Innitely Expandable

Table of Contents

Related product manuals