Orion OPM-4260 - MSCS Utilities and Optional Accessories; Homepage Info and New MFC Control

- 54 - - 55 -
5.16. ORION Homepage log on and Version Information
• In order to move to Orion website, go to "Help" of menu bar ->"OrionDisplay HomePage".
ORION Homepage Log on
• Go to "Help" of menu bar -> "About" to check MSCS.
Checking MSCS Version
6. Control Method of optional accessory
6.1. New MFC
(1) New MFC Connection
1) Connect power of New MFC
2) Connect female D-sub of New MFC to the Com port in the computer with RS-232C cable.
3) Connect male D-sub of New MFC to the RS-232C port in MPDP with RS-232C cable.
4) Install the New MFC at the location of good Remote controller reception.
5) Set the number of the connected MPDP units in advance. The number can be set only by the
Remote controller.
※ For the additional information refer to the "New MFC manual"
New MFC Rear
Adaoter Jack
(5V 1A)
MPDP Connect
PC Connect
Ethernet Connect
USB Connect
AS Connect
MPDP "N x M" Conguration
New MFC Front
HOR
VER
OPM-4260 | OPM-4260R
Innitely Expandable