Orion OPM-4260 - DVI Converter Setup and Modes; ID, CMND, and Input Mode Settings

- 58 - - 59 -
6.2. DVI Converter
• To use DVI Converter, go to MSCS Menu -> Device -> DVI Converter or press "Ctrl+V" using
Keyboard.
DVI Converter Dialog
(1) ID
• Set the ID of DVI Converter. The ID can be selected from 1 to 9.
(2) CMND
• Select the channel of DVI converter to control.
• One of DVI Channel 1(DVIC1), DVI Channel 2(DVIC2), and ALL DVI Channel can be selected.
(3) Input Mode
• Select the input mode of DVI Converter.
• One of DVI, HDMI, HDSDI, PC, DTV, S-VIDEO, and VIDEO can be selected.
• Set : Select one of 7 Input Modes and press "Set".
OPM-4260 | OPM-4260R
Innitely Expandable