Orion OPM-4260 - Control Cable Connection (MSCS); RS-232 C and Ethernet Connection

- 24 - - 25 -
4.3. Connection of Control Cable - In case of using MSCS
• Control signal transmission can be connected by 2 different methods.
(RS-232C or Ethernet)
• RS-232C and Ethernet connection cannot be used simultaneously.
4.3.1. Connection of RS-232C Cable
• Maximum use of RS-232C with Daisy Chain connection is 30 sets or less, if you need
additional connection, use New MFC.(Max 30sets/1 port)
4.3.2. Connection of Ethernet Cable
• In case of Ethernet connection, the control PC should be connected to one of MPDP sets with
Ethernet cable. For the connection between the MPDP sets, they should be connected with
RS-232C cables.
ID 1
ID 7
ID 2
ID 5ID 4
ID 8
ID 3
ID 6
ID 9
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C control PC
RS-232C
ID 1
ID 7
ID 2
ID 5ID 4
ID 8
ID 3
ID 6
ID 9
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
RS-232C
IN OUT
LAN
LAN
LAN
LAN
LAN
LAN
LAN
LAN
LAN
Ethernet control PC
HUB or Router
(Wireless & Cable)
LAN Cable
(Direct Cable)
LAN Cable
(Direct Cable)
LAN Cable
(Cross Cable)
OPM-4260 | OPM-4260R
Innitely Expandable