Orion OPM-4260 - LAN Port Configuration (Direct Connection); Network Information Check

- 36 - - 37 -
5.5. Setting of LAN Port (In case of connecting directly to user's computer)
n Check the network informations
1) Execute the LAN Configurator V1.0 from installation CD.
2) Select Com Port and select "OPEN".
3) Select ID of MPDP which you want to control.
4) Turn off MPDP.
5) Click "GET TCP/IP Info." and check the network informations.
6) Input the network information of the user’s PC to be identical with MPDP set.
However, the final digit of the IP address must be different.
OPM-4260 | OPM-4260R
Innitely Expandable