Orion OPM-4260 - User Guidance and ID Settings; Input;Output Terminals and ID Settings

- 18 - - 19 -
3. Guidance for Users
n Input/Output Terminals
DOWN
UP
PDP CO., LTD.
Made in Korea
• Model Name : OPM-4260
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
MPDP
FCC Verified : Class "A"
This device complies with the Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer
servicing to qualified service personal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
ID SELECT
FANSTB PWR ON
AUDIO/VIDEO
APPARATUS
E329824
42SS
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
PDP CO., LTD.
Made in Korea
• Model Name : OPM-4260
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
MPDP
FCC Verified : Class "A"
This device complies with the Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer
servicing to qualified service personal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
ID SELECT
FANSTB PWR ON
AUDIO/VIDEO
APPARATUS
E329824
42SS
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
❶
❷
❸
❹
❺
❼
❻
❽
1. ID SELECT
Set ID Switch
2. VIDEO Input / Output
Composite Signal, BNC
3. PC Input/Output
Analog RGB Signal, D-Sub 15pin
4. DVI-D Input/Output
Digital RGB Signal(TMDS),
single link 24pin
5. RS-232C Input/Output
MPDP Control, Upgrade by Com Port,
D-sub 9pin
6. SVC
For the exclusive use of service, RJ11
7. LAN
MPDP Control by Ethernet, RJ45
8. AC Input
AC 100V ~ 240V, 50/60Hz
DOWN
UP
PDP CO., LTD.
Made in Korea
• Model Name : OPM-4260
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
MPDP
FCC Verified : Class "A"
This device complies with the Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer
servicing to qualified service personal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
ID SELECT
FANSTB PWR ON
AUDIO/VIDEO
APPARATUS
E329824
42SS
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
n Set ID Switch Setting
• Example of ID Switch setting
- You can set ID with 3 rotary switches as shown in the following figure.
※ When you set ID of MPDP set, power cable must be disconnected. If power cable is not
disconnected during ID setting, MPDP set may be operated with the previous ID and it may
cause abnormal behavior.
※ For stable operation, wait for at least 10 seconds prior to use MPDP control program after the
first AC power connection.
[PDP ID 01]
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
[PDP ID 15]
0
1
2
3
4
5
6
7
8
9
100digit10digitsingledigit
100digit10digitsingledigit
• LED Indication
LED Indication Description
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
FANSTB PWR ON
No Power.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
STB PWR ON FAN
Insert power cord(Stand-By state)
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
FANSTB PWR ON
Power On By MSCS.
The PWR ON LED blinks continually.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
FANSTB PWR ON
Power Off by MSCS Program.
(System ready).
FAN : Normal - LED Off, Abnormal - LED On
IF FAN LED is turned on, please check FANs.
ON OFF BLINKING
OPM-4260 | OPM-4260R
Innitely Expandable