- When you install MPDP, make sure there is at least 20cm clearance for
effective ventilation and do not seal off MPDP sets.
If MPDP sets are installed at the locations of bad ventilation, the inner
temperature can be raised rapidly and it can cause frequent malfunctions
and rapid reduction of the product life.
※ Ventilation space in front of MPDP must be furnished for heat dispersion.
If the front space of MPDP has to be sealed, there must be consideration
for the heat dispersion in the rear side of MPDP.
- Carefully install MPDP not to cover the fan air holes with any structural
object.
If the holes are covered with anything, the inner temperature can be
raised rapidly and it can cause malfunctions.
- Regularly clean off the vent holes in the back of MPDP sets.
If the vent holes and the fan air holes are clogged with dust, it prevents
the air ow inside of MPDP sets.
It can cause rapid increase of the inner temperature and may cause
malfunctions.
Clean off the vent holes and the fan air holes with a vacuum cleaner
regularly.
※
Clearance for Ventilation
※
Do not cover the vent hole for the fan
※
Cleaning and Maintenance
Installationstructure
DOWN
UP
PDP
CO., LTD.
Made in Korea
• Model Name : OPM-4260
• Voltage : AC~100 - 240V
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
MPDP
FCC Verified : Class "A"
This device complies with the Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer
servicing to qualified service personal.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
ID SELECT
FANSTB PWR ON
AUDIO/VIDEO
APPARATUS
E329824
42SS
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
SVCLAN
FAN
To Next Page
Loading...
