Orion OPM-4260 - MPDP Set Configuration (Horizontal;Vertical)

- 56 - - 57 -
Horizontal configuration
1. Press SET button .
SET
2. Press Left and Right buttons sequentially to enter the horizontal configuration
mode.
INFO
3. When the 2 LEDs at lower right corner of each 7-segment of lower line in the
New MFC are turned on, the horizontal configuration mode is started.
HOR
VER
HOR
VER
4. Use the number buttons to set the numbers of MPDP sets in horizontal line.
- e.g. If you want to set 5 for horizontal number, press "0" for ten's place and
"5" for one's place.
1 2 3
4 5 6
7 8
0
9
HOR
VER
5. Pres SET button to finish the horizontal configuration mode.
SET
PDP
REMOTE CONTROL
ON OFF
INFO
A
SET
DVIC1 DVIC2 INFO AUTO
VIDEO S-VIDEO HDSDI
DVI PC DTV HDMI
B
BROADCAST
ID SETTING
ON
OFF
1 2 3
4 5 6
7 8
0
9
DVI 1
DVI 2
OUTPUT FUNCTION
DVI CONVERTER INPUT
MPDP
(2) MPDP Set Configuration (e.g. X:5 sets x Y:6 sets)
Vertical configuration
1. Press SET button.
SET
2. Press Up and Down buttons sequentially to enter the vertical configuration mode.
INFO
3. When the 2 LEDs at lower right corner of each 7-segment of lower line in the New
MFC are turned on, the vertical configuration mode is started.
HOR
VER
HOR
VER
4. Use the number buttons to set the numbers of MPDP sets in horizontal line.
- e.g. If you want to set 6 for vertical number, press "0" for ten's place and "6" for
one's place.
1 2 3
4 5 6
7 8
0
9
HOR
VER
5. Pres SET button to finish the vertical configuration mode.
SET
PDP
REMOTE CONTROL
ON OFF
INFO
A
SET
DVIC1 DVIC2 INFO AUTO
VIDEO S-VIDEO HDSDI
DVI PC DTV HDMI
B
BROADCAST
ID SETTING
ON
OFF
1 2 3
4 5 6
7 8
0
9
DVI 1
DVI 2
OUTPUT FUNCTION
DVI CONVERTER INPUT
MPDP
OPM-4260 | OPM-4260R
Innitely Expandable