Orion OSD-400 - Selecting ID; Operable Range of Remote Controller; Loading the Batteries into the Remote Controller

OSD-400/OSD-800/OSD-1600
Install & User Manual
-
Firmware 3.X
20
<Reference>
Up to 16DVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”
2.2.2.2 Selecting ID
If several DVRs are with unique ID numbers, they can be controller with one remote controller. To
select a specific DVR, keep pressing the ID button of remote controller until a buzzer sounds during 2
seconds.
2.2.2.3 Operable range of remote controller
2.2.2.4 Loading the batteries into the remote controller
Remote controller required two AAA-type batteries. Please, refer the following installation step.
1. Remove the battery cover
2. Take care the poles (+/-)
are correctly positioned.
3. Replace the battery cover