6.6 Recording setup
There are 3 mode for recording – schedule recording, manual recording, event recording.
Schedule recording; records according to the configured schedule. And manual recording records via
pushing “REC” button and event recording records when events are on.
6.6.1 Program setup
Using [Program], adjust frame rate and quality and resolution and configure recording program for
Manual & Event & Schedule.
[OSD-Series]
In event recording, one channel can record up to its max frame rate and if setting 2 channels as event
recording, their recording frame rate will be adjusted automatically.
Program
There are 26 programs from A to Z composing recording quality and resolution per channel.
Refer to the menu “2.2.4.3 Record Setting” programmed configuration value.
CH (Channel)
Display the channel figure.
R (Resolution)
There are 3 resolutions - 4CIF(704x480), 2CIF(704x240), CIF(352x240)
F (FPS)
It means frame per second and can select 1 to 30fps. Max. frame can be changed according to the
configuration.
To Next Page
