System Information
Display recording status and system configuration of DVR
Caution: This function is allowed only for system administrator.
6.3 Network
This is menu for configuring network.
Type
Configure type of Network (Ethernet/xDSL). If connected to cable modem or Lan directly to DVR,
configure by “Ethernet”.
If DVR connects to xDSL- one of PPPoE type, configure xDSL. But if it is not type of PPPoE, configure
‘Ethernet’.
DHCP
With DHCP (Dynamic Host Configuration Protocol), all hosts connected to LAN can get an IP address
To Next Page
Loading...
