4 Monitoring
All analog video image channels connected to the DVR is displayed on the screen by power
connection. It is to utilize all monitoring mode on the DVR.
4.1 Basic Screen
After Power connection, the DVR operates on automatically.
It boots with LED on.
After booting, 16 channel screens are displayed. (OSD-800:
9, OSD-400: 4)
* If there is user password set, Password input window will
be displayed.
4.2 Single Full Screen Mode
Press the channel number wanted or click mouse button.
Press [MULTI] button to return to divisional screen.
4.3 Multi Screen Mode
Press [MULTI] for multi channel display or click “Display”
icon from Function menu.
Press [MULTI] button every time, screen mode is changed
to 4A, 4B, 4C, 4E, 9A, 9B, 10A, 16 channel division. (OSD-
800: 4E, OSD-400: not supported).
4.4 Screen Description
The status bar from monitoring screen, it shows DVR’s current status that included Date/Time, Record,
Motion/Sensor Detection, Manual Record, Text input and HDD’s record capacity.
4.5 Auto Switch Mode
There are System Standard modes and User Defined mode in Auto Switch mode. And Users
Sequence mode operates by the press [SEQ] button.
To Next Page
Loading...
