User sequence can be edited. There are 16 user sequence mode and its interval is from 1 to
60seconds.
Multi mode
OSD-1600 has 3 predefined screen modes. 4C (4channels), 9C(basic 7 channels and additional 2
channels),10C(10 channels). In case of OSD-800, it can use only 4C(4channels) and OSD-400
doesn’t provide multi mode.
The way to composing
The way to compose screen is selecting the target and after selecting right window and press [Enter]
button or use mouse. If channel selection is down, press [ESC] button or click mouse light button.
VGA Resolution
There are nine resolutions – 800x600@56Hz, 1024 x 768@60Hz, 1280 x 720@50Hz,1280 x
720@60Hz, 1920 x 1080p60, 1920 x 1080i50, 1920 x 1080i60, 1920 x 1080RB,
Display information
Display information is to configure which information will be shown on live view and playback view. In
live view, time, channel name, event, recording status, HDD, remote controller ID, text can be set.
In playback view, time, command, channel name, event, text can be configured.
Scan Mode
Support Over Scan / Under Scan Monitor.
6.4.3 Audio Setup
With this menu, user can configure Voice Channel, Audio recording, Volume, Synchronization, Mixing.
To Next Page
Loading...
